Baker Hughes Masoneilan SVIII AP, Installation And Maintenance Manual

Page: 20 / 204

© 2017 Baker Hughes, a GE company, LLC. All rights reserved.
20
|
BHGE
ValVue Software
Not only does ValVue provide the ability to quickly and easily set up the SVI II AP you can also
monitor operation and diagnose problems with ValVue’s advanced diagnostic capabilities.
NOTE
You must use the ValVue 3 software and the SVI II AP DTM
software to support HART
®
7. ValVue 2.x will not work.
System Requirements
Minimum requirements for all versions of ValVue software are Windows
®
2003 Server (SP3),
Windows
®
2008 Server (SP2), XP, Windows
®
7, Windows
®
8, Windows
®
Server 2012, 64 MB
RAM, and a serial or USB port connected to a HART
®
modem. For software installation, a
connection to the internet to download ValVue and the SVII AP DTM.
ValVue and SV II AP DTM DTM Trial Version
You must download the ValVue software and the SVII AP DTM software and install to configure
and use the SVI II AP. For the most recent software visit our SVI II AP web site at:
https://www.geoilandgas.com/file-download-search .
The SVI II AP DTM software and the Valve software comes with a trial version of ValVue. For 60
days after the initial installation, The ValVue software provides the FDT frame capability in
which the SVI II AP DTM software operates. The SVI II AP DTM software provides the capability
of configuring, calibrating, diagnosing, trending and much more. After the 60 trial period
ValVue must be registered for use. ValVue Functionality includes:
Setup Wizard Remote display of valve position, actua-
tor pressure(s)
Set calibration parameters Set configuration parameters
Monitor status ⁄ error indicators Input/Output configuration
Remote calibration of the SVI II AP Remote configuration of the SVI II AP
Remote operation of the SVI II AP Backup and restore configuration (clone
device)
Trend setpoint, valve position, actuator
pressure Display comparative test results (full ver-
sion only)
Perform diagnostic test procedures (full
version only)