Masoneilan SVI3 Installation and Maintenance Manual
=
| 73
© 2021 Baker Hughes Company. All rights reserved.
5. Maintenance and Troubleshooting
5.1 SVI3 Maintenance and Repair
The SVI3 was designed based on a modular concept. Most sub-assemblies are
interchangeable allowing for easy
,
quick component swapping.
The only maintenance procedures recommended for the SVI3 are:
• Remove and install the cover
,
for upgrade to display
• Remove and install the Pneumatics Module (containing the IP and Pneumatic relay)
• Addition or replacement of the Options board
5.1.1 Repair
Only qualified service personnel are permitted to make repairs.
Only parts supplied by the factory are permitted. This includes not only the major
assemblies but also mounting screws and O
-
rings. No substitutions with non-Masoneilan
parts are permitted.
Repair and replacement instructions are sent in the box with the appropriate kit.
NOTE : Substitution of components can void safety approvals.
