Masoneilan SVI3 Installation and Maintenance Manual
=
| 107
© 2021 Baker Hughes Company. All rights reserved.
This interface is best used to monitor a device which has been in operation for some
period of time and supports setting proper alert limits for that particular valve system. It is
also a great tool for troubleshooting a device, as well as identifying trends to support
maintenance or service intervals.
7.4.1.4 Alerts / Limits
The KPIs are continuously monitored by the SVI3 and can trigger a series of configurable
alerts if the data was to drift out of the allowable range. Users have the option to enable/
disable each alert, mask the alert to prevent it from publishing over HART, and ability to
configure the range or threshold of the alert value. As each application is unique, the
limits should be set on a case by case basis. Best practice to initially set the limits (or use
defaults), then review the historic diagnostic trends after some period of run-time. Based
on the trends, users can adjust limits as necessary to gain best insights of the
diagnostics.
