background image

Masoneilan Regulators Models 525 & 526 Manual  |  c

Copyright 2020 Baker Hughes Company. All rights reserved.

Table of Contents 

 

Safety Information .....................................................................................................................1
1. Introduction ............................................................................................................................2
2. General ...................................................................................................................................2
3. Unpacking ..............................................................................................................................2
4. Installation..............................................................................................................................3
5. Adjustment .............................................................................................................................3
6. Body Disassembly.................................................................................................................3

  6.1 525 (Reducing Service)....................................................................................................3
  6.2 526 (Back Pressure Service) ...........................................................................................3

7. Maintenance & Repair ...........................................................................................................4

  7.1 Failure to shut off

 .............................................................................................................4

  7.2 Bushing Removal .............................................................................................................4
  7.3 Lapping Seats ..................................................................................................................4
    7.3.1 525 (Reducing Service) ...........................................................................................4
    7.3.2 526 (Back Pressure Service) ...................................................................................5
  7.4 Pinning .............................................................................................................................5
  7.5 Packing Box .....................................................................................................................5

    7.5.1 Carbon/PTFE Rings (Standard)

...............................................................................6

8. Valve Body Reassembly .......................................................................................................6

  8.1 525 (Reducing Service)....................................................................................................6
  8.2 526 (Back Pressure Service) ...........................................................................................7

9. Actuators ................................................................................................................................7

  9.1 Type 10900 Actuators

 ......................................................................................................7

Summary of Contents for Masoneilan 525 Seris

















Reviews: