Baker Hughes Masoneilan 12400 Series Instruction Manual Download Page 2

2 | Baker Hughes 

© 2019 Baker Hughes Company. All rights reserved. 

 

THESE 

INSTRUCTIONS 

PROVIDE 

THE 

CUSTOMER/OPERATOR 

WITH 

IMPORTANT  PROJECT-SPECIFIC  REFERENCE  INFORMATION  IN  ADDITION  TO 
THE  CUSTOMER/OPERATOR’S  NORMAL  OPERATION  AND  MAINTENANCE 
PROCEDURES.  SINCE  OPERATION  AND  MAINTENANCE  PHILOSOPHIES  VARY, 
BAKER  HUGHES  COMPANY  (AND  ITS  SUBSIDIARIES  AND  AFFILIATES)  DOES 
NOT  ATTEMPT  TO  DICTATE  SPECIFIC  PROCEDURES,  BUT  TO  PROVIDE  BASIC 
LIMITATIONS  AND  REQUIREMENTS  CREATED  BY  THE  TYPE  OF  EQUIPMENT 
PROVIDED.  

THESE  INSTRUCTIONS  ASSUME  THAT  OPERATORS  ALREADY  HAVE  A 
GENERAL  UNDERSTANDING  OF  THE  REQUIREMENTS  FOR  SAFE  OPERATION 
OF MECHANICAL AND ELECTRICAL EQUIPMENT IN POTENTIALLY HAZARDOUS 
ENVIRONMENTS. 

THEREFORE, 

THESE 

INSTRUCTIONS 

SHOULD 

BE 

INTERPRETED AND APPLIED IN CONJUNCTION WITH THE SAFETY RULES AND 
REGULATIONS 

APPLICABLE 

AT 

THE 

SITE 

AND 

THE 

PARTICULAR 

REQUIREMENTS FOR OPERATION OF OTHER EQUIPMENT AT THE SITE. 

THESE  INSTRUCTIONS  DO  NOT  PURPORT  TO  COVER  ALL  DETAILS  OR 
VARIATIONS  IN  EQUIPMENT  NOR  TO  PROVIDE  FOR  EVERY  POSSIBLE 
CONTINGENCY TO  BE  MET IN  CONNECTION  WITH  INSTALLATION,  OPERATION 
OR MAINTENANCE. SHOULD FURTHER INFORMATION BE DESIRED OR SHOULD 
PARTICULAR  PROBLEMS  ARISE  WHICH  ARE  NOT  COVERED  SUFFICIENTLY 
FOR  THE  CUSTOMER/OPERATOR'S  PURPOSES  THE  MATTER  SHOULD  BE 
REFERRED TO BAKER HUGHES. 

THE  RIGHTS,  OBLIGATIONS  AND  LIABILITIES  OF  BAKER  HUGHES  AND  THE 
CUSTOMER/OPERATOR  ARE  STRICTLY  LIMITED  TO  THOSE  EXPRESSLY 
PROVIDED IN THE CONTRACT RELATING TO THE SUPPLY OF THE EQUIPMENT. 
NO  ADDITIONAL  REPRESENTATIONS  OR  WARRANTIES  BY  BAKER  HUGHES 
REGARDING  THE  EQUIPMENT  OR  ITS  USE  ARE  GIVEN  OR  IMPLIED  BY  THE 
ISSUE OF THESE INSTRUCTIONS. 

THESE  INSTRUCTIONS  ARE  FURNISHED  TO  THE  CUSTOMER/OPERATOR 
SOLELY  TO  ASSIST  IN  THE  INSTALLATION,  TESTING,  OPERATION,  AND/OR 
MAINTENANCE OF THE EQUIPMENT DESCRIBED. THIS DOCUMENT SHALL NOT 
BE  REPRODUCED  IN  WHOLE  OR  IN  PART  WITHOUT  THE  WRITTEN  APPROVAL 
OF BAKER HUGHES. 

 

 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Masoneilan 12400 Series


















Reviews: