Baker Hughes Druck DPI 620 Genii, Instruction Manual

Page: 112 / 166

Copyright 2013 Baker Hughes Company.
100 | DPI 620G Instruction Manual–English
Chapter 10. FOUNDATION™ Fieldbus
4. The main FOUNDATION™ Fieldbus application will now open.
Note: Updating CH1, CH2, P1 or P2 tasks is only possible when the FOUNDATION™
Fieldbus application is not running. Close the FOUNDATION™ Field bus application by
pressing the Home button and selecting Exit. Refer to Section 10.3.
Note: Ensure the DPI 620 Genii USB setting is in Storage Device mode. See Section 2.2.7.
Note: CH2 is locked into Volts measure mode. Trying to select a function on CH2 will result
in an information message and the selected function not being set.
10.3 FOUNDATION™ Fieldbus Toolbar
On entering the FOUNDATION™ Fieldbus application, the toolbar is displayed. The icons are
grayed out when they are not active.
Figure 10 - 3: FOUNDATION™ Fieldbus Toolbar
The icons functions are described below:
10.4 Scanning for Devices
The following steps describe how to scan for FOUNDATION™ Fieldbus devices over a
FOUNDATION™ Fieldbus H1 connection:
Icon Name Description
OPEN CONNECTION Only available when awaiting an open connection.
(When navigating devices Open Connection is
replaced by the Close
icon).
CLOSE Only available in navigation tree (refer to Section 10.8)
and Functional Group view (refer to Section 10.9). This
icon closes down the connection and returns to Device
Focus view (refer to Section 10.7).
SETTINGS Application configuration settings and DD library details
(refer to Section 10.14).
COMMIT Commit updated values back to the device (refer to
Section 10.9.3).
ABORT Abort Update of parameters, reverts to previous values
(refer to Section 10.9.3).
STATUS Provides device profile of currently connected device
(refer to Section 10.5).
FUNCTION FINDER Search FF variables and device functions.
HOME Returns to Main Application. Allows user to either
minimize or exit. If FOUNDATION™ Fieldbus readings
are to be referenced in Main Application, then minimize
should be selected.
DEVICE COMMUNICATIONS ON Indicator showing active communication.
DEVICE COMMUNICATIONS OFF Indicator showing no active communication.