Copyright 2020 Baker Hughes Company.
2 | ADROIT6000 Instruction Manual–English
2.3 Markings
The sensor will be marked with:
Refer to figure above and explanation below:
1. Model number. Refer to the product datasheet for identification.
Note:
If the model number is followed by eight characters ‘
-
########’, refer to
manufacturer’s specification drawing ########.
2. Serial number.
3. Pressure units, pressure reference.
4. Supply voltage limits.
Note:
Factory calibrated at 15
V.
5. Signal range and units.
6. Manufacturer’s name and address.
7. Country of assembly.
3. Installation and Operation
3.1 General Requirements
When the sensor is received, check the completeness in accordance with the supplied Calibration
Certificate.
Read and understand all the related data before installing and using the sensor. This includes all
local safety procedures and installation standards, this document and the product datasheet or
specification drawing.
To identify the electrical and pressure connections, refer to the calibration certificate.
Ensure the sensor is mounted in a manner that avoids unwanted mechanical or thermal stress
such as vibration, shock or excessive or rapid temperatures excursions.
A male pressure connector must not be sealed against the base of the thread.
The ambient temperature and the process media temperature to be measured must not exceed
the ranges specified in the sensor specification.
For both gaseous and liquid media operating at low temperatures it is necessary to exclude
crystallization or freezing components of the media from the working chambers and connecting
pipelines.
ADROIT6###
PRESSURE SENSOR
ADROIT6###-T#-A#-CD-H0-P##
S/N ########
### TO ### ### #
Supply: ## TO ## V ## mA
Output: ### TO ### ##
DRUCK LTD. LEICESTER, LE6 0FH, UK
MADE IN #####
[1]
[2]
[3]
[4]
[5]
[6]
[7]
9
8
