Update Sensor Firmware Using WirelessHART Gateway
Use the Ranger Pro configuration software to update devices on an Emerson
WirelessHART gateway.
Before you can update sensor firmware, be sure you have downloaded and added current
versions of the firmware to the application.
To update device firmware using a WirelessHART on an Emerson WirelessHART gateway:
1. Open Ranger Pro configuration software.
2. Select
Network Manager
>
Gateways
tab.
3. Select the Emerson gateway hosting the sensors you want to update.
4. Select the
Firmware
tab.
5. Select a valid firmware version and click
Upgrade
.
6. Select
Network Manager
>
Sensors
tab.
7. Update progress is displayed in the
Firmware Version
field. To cancel, right-click on
Firmware Version
and select
Cancel Firmware Upgrade
. Canceling the upgrade may
take from 1-5 minutes.
8. Once complete, the Ranger Pro device automatically reboots. The version number
displayed in
Firmware Version
is updated.
9. When successful, you can clear the status message. Right-click on the status and click
Clear Firmware Upgrade Status
.
52/56
Ranger Pro Wireless Condition Monitoring Device
User Guide
125M6113 Rev. D
