12. Verify that the device is tightly sealed. There shouldn't be
any gap between the e-module retaining ring and the
case, as shown below.
4.2 Configure Network
Refer to your network infrastructure vendor documentation to configure gateways, device
managers, backbone routers or access points as applicable. Configuration may include
assigning IP addresses, wireless network IDs and wireless join keys.
Ranger Pro Configuration Software
The Ranger Pro configuration software is used to provision, configure, monitor, and maintain
Ranger Pro devices using either a USB NFC reader or over the air using an appropriately
configured gateway.
Ranger Pro configuration software functions include:
l
Device provisioning
l
Rebooting the device
l
Unprovisioning
l
Device configuration including
l
Applying default configurations
l
Saving, loading, and applying custom configurations
l
Device diagnostics including
l
E-module status
l
Sensor status
l
Device application firmware management
4.3 Provision Devices
Before installing Ranger Pro devices, we recommend that you prepare each device to join your
network. Depending on your network infrastructure, you can provision multiple devices over-
the-air (OTA) or individually using the Ranger Pro USB device NFC reader.
When you provision the device, you provide it as needed with:
l
The correct UTC adjustment
l
A new network ID
l
A new network join key
20/56
Ranger Pro Wireless Condition Monitoring Device
User Guide
125M6113 Rev. D
