Bake Max TCO6G, Installation And Operation Manual, Page: 86 / 92

The monthly cleaning, in addition to the described process, the rear part, inside the Combi
oven TOUCH where the fan turbine is located, must be completely cleaned and decalcified.
Carry out cleaning described in Output management for special washing cycles;
Remove the left rack (it is necessary to push it up to loosen it from the lower screws, then the
rack can be released from the upper screws and removed).
To remove the fan protection, lift it to take it off.
Continue doing the same way as in the "Daily Cleaning" chapter (maintenance). In addition,
spray a cleaner to the rear part of the cooking chamber, blower, by water sprinkler (the tube
in the center of the fan which the inlet pipe leads) and the heating elements.
After cleaning the cooking chamber of the device, start cleaning. Under no circumstances
should the temperature exceed 70 °C!
Repeat the process if necessary.
Rinse the door gasket with the cleaning agent.
After cleaning the cooking chamber, close the inner wall (opposite the fan) and lock the locks
to rotate them, return the rack to the left.
After cleaning, leave the door ajar so that the air leaves the cooking chamber. By doing this
you help extending the life of the door sealing.
Quarterly cleaning (maintenance)
The quarterly cleaning is repeated throughout the daily and monthly cleaning process. In
addition, with the process described, the air cleaner is cleaned.
The equipment is designed for an IPX5 environment (water spray). For this reason, it includes
an auxiliary fan for cooling the inner space where electricity is connected and the electronic