Bake Max TCO6G, Installation And Operation Manual, Page: 32 / 92

Each cooking cycle consists of at least one phase to a maximum of six phases; after completion of
a phase, the device automatically goes to the next phase.
For each phase the device is enabled to manage the following settings:
- the cooking type:
- in time (the phase lasts the time set and the set point of operation is an absolute value)
- in Delta T (only if the needle probe is enabled, i.e., if the parameter P2 is set to 1, the phase
lasts until the temperature, detected by the needle probe, reaches the set point inside and the
set point of operation Is relative to the temperature detected by the needle probe, i.e.,
"temperature detected by the needle probe + Delta T set point)
- on the inside (only if the needle probe is enabled, i.e., if the parameter P2 is set to 1; the phase
lasts until the temperature, detected by the needle probe, reaches the set point inside and the
operating set point is an absolute value)
- the set point of operation (only if the cooking time has been set or the cooking inside)
- Delta T set point (only if cooking in Delta T has been set)
- the humidification
- the duration of the phase (only if cooking has been set in time)
- The set point inside (only if cooking in Delta T or cooking inside has been set)
- The fan (turbine) has 2 programmable speeds and reverse direction of rotation.
Setting the cooking cycle
To set the cooking mode, operate as follows:
1. - Ensure that the device is activated and no procedure is in progress.
2. - Touch the "manual" option:
3. - Touch to set:
- the cooking time:
- the cooking in Delta T:
- the cooking inside:
To set the operating set point, operate as follows:
4. - Touch the option
5. - Touch the slide bar