PROPANE GAS CONVERSION INSTRUCTIONS
A griddle is equipped with xed ori ce hoods and shipped from the factory for use on natural gas.
To convert to propane gas, install the propane burner ori ce hoods supplied as follows:
1 - Remove the griddle plate by lifting with two people and set a side.
2 - Slide the burners back o of the valve ori ce hoods a couple of inches and let it rest.
3 - Remove the natural gas ori ce hoods with a 1/2 wrench.
4 - Apply a very little bit of pipe dope on the threads of the valve.
DO NOT APPLY PIPE DOPE INTO ORIFICE HOOD.
5 - Attach the supplied propane burner ori ce hoods with a 1/2 wrench.
6 - Convert the pressure regulator from Natural to Propane gas by inverting the snap-in device beneath the
cap on the regulator. This will require a fair amount of pressure. Do not remove the spring. When replacing
the cap make sure the snap-in insert goes down on top of the middle of the spring.
7 - Test for proper pressure; 10 W.C. (water column) using a manometer.
8 - Slide burners back onto the ori ce hoods.
9 - Apply the Propane Notice stickert to the front of the unit for futer reference.
1
2
3
4
180º
PROPANE GAS
NATURAL GAS
8
