BAK Thermoplastic Welding Technology AG
7
WARNING
If the power supply cable gets damaged, it has to be replaced by the manu-
facturer, its customer service or by a qualified person in order to avoid dan-
ger.
The machine must not be used by personnel (including children) with lim-
ited physical, sensory or mental capabilities or lack of experience and/or
knowledge, except when supervised by a person who is responsible for their
safety or when advised how to use the device by that person.
Children must be supervised in order to ensure that they do not play with
the machine.
Because of the enormous fire danger, the operating personnel must be spe-
cially briefed and regularly instructed.
Fire can occur if the machine is not used carefully.
Do not leave the machine unobserved while it is in operation.
Demonstrate the necessary caution when operating the device near inflam-
mable materials. Do not operate on the same surface for longer periods of
time.
A fire extinguisher must always be within reach in the work area.
The machine must not be used in explosive atmospheres.
Heat may reach inflammable materials that are not readily visible.
There is a very significant risk of fire when the machine stops because of
any disturbance and the hot air device is still running (max. temperature of
the air flow 550 °C). Therefore, special attention should be placed on the
subsurface and the material to be processed.
The welding machine must not be used on inflammable surfaces (e. g.
wooden roofs and floors made of wood)
The machine bears the protection mark IP20 and must therefore be protect-
ed from damp and rain.
When using the machine on roofs and tables, it could fall down due to its
automatic drive system. In order to avoid a fall, necessary precautions must
be taken.
