BAK Thermoplastic Welding Technology AG
2
SAFETY
Danger to life
when opening the device as live components and connec-
tions are exposed. Unplug the device before opening it.
Danger of fire and explosion
if the device is used incorrectly. Demon-
strate the necessary caution when using the welding machine near com-
bustible materials. Never use the device in inflammable areas.
Danger of burns
Do not touch the hot air device when it is still hot. Let the device cool
down.
Connect the device to a
socket with protective earth conductor
. Any
interruption of the protective earth conductor within or outside the device
is dangerous! Only use extension cables with protective earth conductor
and a minimum diameter of 2.5 mm².
The
voltage rating
stated on the nameplate must correspond to the mains
voltage.
Consult your local electricity supply board if necessary.
For personal protection, the device must be connected to a
residual cur-
rent circuit breaker
before using it on construction sites.
Do not leave the device unobserved.
Hot air radiation of the hot air de-
vice may ignite combustible materials. Heat may reach inflammable ma-
terials that are not visible or obvious.
Protect the device from damp and wet!
