Bajaj Discover 100M, Service Station Manual

Page: 92 / 319

IMPORTANCE OF PM SCHEDULE EXECUTION
Discover 100 M
Service Station Manual
65
Dealer Development Center
Akurdi Pune
• Blow the low pressure compressed air on drive chain
1. Clean NON SEALED drive chain by diesel / Kerosene nylon brush.
For details, please refer SOP given in Service Circular SER/GEN/17
dated 25.03.2014 or Preventive Maintenance Encyclopedia page No. 166
to 174
2. Put the NON SEALED drive chain in molten grease with the help of
hook & keep it for 2 minutes in completely dipped condition.
Caution :
Never lubricate SEALED drive chain in greasing unit, as this will
damage the drive chain.
3. After 2 minutes, take out the drive chain with the help of hook & hang it
on chain hanging stand to allow dripping off excess grease.
4. Rotate the roller using hand to allow the chain to slide on roller for
proper dripping off excess grease & uniform lubrication.
Grease collected in tray can be reused.
Keep the chain hanging on the stand for 3 minutes to allow the molten
grease to solidify.
5. Remove chain from the stand & refit on vehicle
SOP for Non Sealed Drive Chain Lubrication by removing from Vehicle
Hook
Chain
Hanging
Stand
Di^ev c[n upr li[ p[\Sr viL) ki[Àp[\AD hvi miri[
ni[T (sÃD Di^ev c[nn[ vihnmi>Y) kiQ)n[ l&b)\k[Sn krvin) p¹wt)
{SOP)