Camera’s Function
The camera’s purpose was to ensure that the controller of the car gets to view
the surroundings so that the driver can drive safely and accordingly to the
surroundings. We first built a phone case holder according the phone we were
going to use, and after some measurements, we assembled a proper phone
carrying case. We then glued that case onto a servo motor as you can see
under the board. This motor allows the phone’s camera to rotate left and right
as per the purpose of this camera. For the connecting, you would need
another phone and connect the two phones via a video conference call.
There’s also sound in this, so you can speak and hear to the area that your car
is in. To control the movements of the camera, you must pair your phone with
the Bluetooth module so that you get access to the controls of the car.
