Baja BO250 UTV, Owner'S Manual

Page: 46 / 57

46
BATTERY
WARNING
NEVER REMOVE THE STRIP OF CAPS NOR
ADD ANY WATER OR ELECTROLYTE.
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the red
positive (+) pole of the battery.
(see figure 24)
2. Connect the black negative (-) cable to the black
negative (-) pole of the battery.
(see figure 25)
Note: The red positive (+) cable has a larger
diameter than the black negative y cable.
3. Charging rate: Charge battery @ 0.7 Amps for 5 ~
10 hours.
• After charging is complete, install securely cap
strip (see figure 26)
• Install battery into battery tray located under
driver seat (see figure 27).
• Once battery is firmly seated in tray, attach red
positive (+) wire to positive (+) terminal on battery
(see figure 28), then attach black negative (-) wire
to negative (-) terminal on battery (see figure 29)
• Install battery cover (see figure 30)
• Secure battery with battery strap
(see figure 31)
Figure 27
Figure 25
Figure 24
Figure 26
Figure 28 Figure 29 Figure 30 Figure 31