Baja BO250 UTV, Owner'S Manual

Page: 45 / 57

45
BATTERY
Note: The following page is for vehicles with battery’s containing separate electrolyte pack.
Preparing the battery:
· Place battery on level surface. Remove cap strip
from top of battery. (see figure 20)
· Remove Vent cap from battery vent located on
top side portion of battery. (see figure 21)
. Wear eye protection and rubber gloves for this
step. Cut off tip of electrolyte bottle and attach
tube. Place other end of tube in battery and
allow the electrolyte to drain in battery cell. Fill
battery to upper level mark located on front of
battery. Repeat step for each of the 6 cells (see
figure 22)
· After each cell is filled with electrolyte to upper
level, remove tube from battery.
· Discard empty electrolyte bottles in a waste area
that is inaccessible to children and animals.
· After filling let battery stand for at least 30
minutes before charging. This allows the
electrolyte to penetrate plates for optimum
performance and ensures longer battery life.
· After 30 minutes the battery is ready for its initial
charge. Place caps loosely over battery cell
holes (see figure 23)
Figure 20
Figure 21
Figure 22
Vent cap
Figure 23