Baja BO250 UTV, Owner'S Manual

Page: 41 / 57

41
ENGINE OIL
TRANSMISSION OIL CHANGE
1. Turn engine on and let it idle for at least 5 minutes to warm up, turn engine off and remove
key.
2. Place oil pan or any suitable container under rear of engine to drain oil.
3. Remove transmission drain plug. Let oil drain.
4. Remove fill plug on the right rear of engine casing.
5. Inspect fill plug.
6. Reinstall drain plug and torque to 25ft.lbs.
7. Fill transmission through fill plug with 22 ounces of SAE 80W-90 oil.
8. Reinstall fill plug and start engine.
Be sure to change the gear oil after the first 30 hours of use.
ENGINE OIL CHANGE
1. Turn engine on and let it idle for at least 5 minutes to warm up, turn engine off
and remove key.
2. Place oil pan or any suitable container under engine to drain oil.
3. Remove engine drain bolt. Let oil drain.
4. Remove, clean and inspect oil filter cap, spring and oil filter. If damaged, replace.
5. Reinstall oil filter, spring and oil filter cap.
6. Reinstall the drain bolt and torque to 25 ft.lbs.
7. Fill 1 qt. of API classification (see CHART).
8. Start engine and check for any leaks.
9. Turn engine off and check the oil level (see ENGINE OIL LEVEL CHECK).
Engine oil fill/dipstick
Min Max
Transmission
drain plug
Transmission fill
plug
Spring Oil filter
Engine drain bolt
Oil filter cap