11
CHECk-UPS, ADJUSTMENT AND MAINTENANCE
Checking the Oil
Check the engine oil each time prior to operating the mini bike.
The oil level should be between the upper and lower lines of the oil gauge.
1. Set the Mini Bike on level ground, screw off the oil gage plug, wipe the oil
gage rod clean and then insert the gage plug into the crankcase again to
check the oil level. There is no need to screw the oil gage plug into its hole in
the crankcase.
2. Add lubricating oil up to the edge of the fill plug.
3. Finally screw in the oil gage plug tightly.
Lubricating Oil Recommended
The lubricating oil is an important factor affecting the performance and service life
of the engine. Please refer to the chart for the correct grade of engine oil based on
the environmental conditions in your area. Do not use any other type of oil other
than what is recommended in the chart. DO NOT MIX OIL WITH THE GASOLINE.
Lubricating oils of different viscosity shall be employed in different regions and at
different temperatures.
CAUTION
Never start the engine when there is insufficient lubricating
oil. Otherwise, it will cause harm to the engine.
Oil dip stick
MACHINE
OIL
TEMP.
°C
°F
-30
-22
40
104
-20
-4
-10
14
0
32
10
50
20
68
30
86
20W-50
15W-40
10W-30