RESUMPTION OF SERVICE AFTER STORAGE
1. Remove the covering and remove the wooden blocks used in storing the vehicle. Change
the engine oil if the vehicle has been out of service for over 4 months.
2. Drain off the remaining atomized anti-rust oil from the fuel tank, followed by filling it with
fresh gasoline therein.
3. Prior to driving, all the required check-ups must be made. It is better to drive it at a low
speed in an open area to test its performance before normal operation.
TABLE AND TORQUE OF FASTENERS
Ser. No.
Fastener
Torque (Newton/m)
(Foot/lb)
1
Front wheel axle nut
35-45Nm (26-33 ft.lb.)
2
Rear wheel axle nut
50-60Nm (37-44 ft.lb.)
3
Nut for tightening upper joining plate of front
fork with vertical tube
40-50Nm (30-37 ft.lb.)
4
Nut for fixing engine
20-25Nm (15- 18 ft.lb.)
5
Rear arm nut
35-50Nm (26-37 ft.lb.)
6
Exhaust silencer nut
20-25Nm (15-18 ft.lb.)
7
Bolt for tightening upper joining plate of front
fork with shock absorber
15-20Nm (11-15 ft.lb.)
8
Bolt for fixing footrest
20-25Nm (15-18 ft.lb.)
