background image

Warranty

Congratulations on your purchase of the  

Baja Motorsports BV250 Motorcycle.  

It is warranted to be free of manufacturing defects in the material of 

workmanship for a period of 90 days from the date of purchase. During 

the warranty period BAJA MOTORSPORTS, LLC will at its option, repair, 

provide replacement parts or replace your Baja Motorsports BV250 

Motorcycle at no charge.  This warranty does not cover normal wear 

items or damage caused by neglect or misuse of the product.

Engine Warranty – 90 days

Frame Warranty – 90 days

Warranty is void if:

Frame is bent or broken due to abuse

Wheels are bent or broken

Fender bent or broken due to abuse

Any sign of impact, accident, jumping, spin-outs or roll over.

BAJA MOTORSPORTS, LLC is not liable for any damage claim or liability 

claim person or otherwise resulting from the operation of this product in 

any way.

Should you experience a problem or need to return your Baja Motorsports BV250 

Motorcycle for repair, please call the BAJA MOTORSPORTS customer service 

department TOLL FREE at 1-888-863-BAJA (2252) between the hours of 7am and 

5pm Monday thru Friday PST and Saturday 8am to 4pm PST.  During DST hours 

change to MT.  You will be instructed how to proceed.

A COPY OF THE SALES RECEIPT IS REQUIRED.

Summary of Contents for BV250




































































Reviews: