3
Engine Oil
Checking and Adding Oil
1) Park your motorcycle on level ground and use the side stand for
support.
2) Start the engine and let it run for 3-5 minutes.
3) Turn the engine off and wait for at least 3 minutes.
4) Remove the oil fill plug/dipstick and wipe clean.
5) Hold the motorcycle in a upright position.
6) Insert the dipstick in the oil fill until it rests on the metal, do not
screw it in.
7) Remove the dipstick and check the oil level.
● If the oil is at or near the upper level mark there is no need to add
oil.
● If the oil is at or near the lower level mark, add the recommended
oil until it reaches the upper level mark and do not overfill.
8) Screw in the oil fill plug/dipstick
9) Check for any leaks.
Changing Engine Oil
This procedure will require some mechanical skill and special tools
such as a torque wrench. If you are not capable of performing this
procedure contact your local service center.
Draining Engine Oil:
1) Park your motorcycle on level ground and use the side stand for
support.
2) Start the engine and let it run for 3-5 minutes.
3) Turn the engine off and wait for at least 3 minutes.
