THERMOMASSEUR
®
|
geysair
tm
addendum to the owner’s manual
T
H
E
R
M
O
M
A
S
S
E
U
R
®
www.bainultra.com
Printed in Canada. Copyright © september 2012 Bainultra inc. all rights reserved. 45100169
some products, specifications, and services mentioned in this manual are described
in pending patent applications or are protected by patents.
supersedes page 22 of owner’s Manual
7
2. installation
balneo
®
- naos & sanos
installation
1. Bath site
1-1
once the floor has been finished and is
perfectly level, place thermomasseur
®
in
the exact chosen location. trace the outline
of the bath with an erasable marker.
1-2
remove the thermomasseur
®
and carefully
place it upside down on a blanket or
corrugated cardboard (ex. the box in which
it was delivered).
1-3
on the floor, determine by referring to
measurements taken underneath the bath,
the exact location of the drain, the air pipe,
and the two anchoring points at each end
of the bath.
Balneo
®
- naos & sanos - installation
2-1
2-2
2-3
1-1
Horizontal – Drain
Horizontal –
Anchoring
Point
Vertical –
Drain
Vertical –
Anchoring
Point
Vertical –
Air Intake
Pipe
1- 3
toP view
2-1
install the drain and overflow set on the
bath and the first section of the air intake
pipe (1 1/2’’ aBs) under the floor.
2-2
apply a silicone joint to the base rim.
2-3
Put the thermomasseur
®
in place and
put pipes through the floor, ensuring
bath is aligned with anchoring points.
for geysair-equipped baths,
also run
the water hose and electrical wiring
through the floor.
2-4
wipe off excess silicone immediately.
Summary of Contents for GEYSAIR
Page 2: ......