1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © september 2012 Bainultra inc. all rights reserved. 45100169
some products, specifications, and services mentioned in this manual are described
in pending patent applications or are protected by patents.
T
H
E
R
M
O
M
A
S
S
E
U
R
®
12
geysair
tm
addendum to the owner’s manual |
THERMOMASSEUR
®
T
H
E
R
M
O
M
A
S
S
E
U
R
®
essenCia oval 7236 - Par ts and tools - installation
essencIa oval 7236
parts anD tools
essencIa oval 7236
installation
B. tools reQuired
loCation installation
the essencia oval requires a 10 1/2” x 12” (27 cm X 30 cm)
compartment for the drain, distance air inlet and, if appli-
cable, space for control cables and options. refer to the
installation template.
aCCess and air inlet
for this model, the turbine is not installed on the bath-
tub.
determine a location near the bathtub at a maxi-
mum distance of 15 feet or (4.6 metres) under the floor,
in a cabinet or any other location to conceal the turbine
and optional accessory casings, if applicable. the location
chosen must also be accessible and allow sufficient air intake
for the turbine.(refer to the
turBine – Distance instal-
lation section).
B-1
48-inch level
B-2
Caulking gun
B-3
screwdriver
B-4
3/4” ratchet wrench
B-5
silicone
a. Parts inCluded
a-1
floor anchoring
a-2
installation template
a-3
flexible 1
1/2
” pipe for overflow
a-4
screws
a-5
nuts
a-6
washers
a-7
seals
B-2
B-1
B-4
B-5
B-3
A-1 x 2
x 2
x 2
x 1
x 12
A-3
A-4
A-5
A-6
x 2
A-7
A-2
1. loCation
1-1
once the compartment around the drain is
completed in the floor, place the installation
template on the ground at the chosen location.
1-2
align the position of the overflow drain with
the floor drain and ensure that the compart-
ment size corresponds to requirements.
1-3
mark the location of the anchor point screws.
1-4
remove the installation template and screw
in the anchor points in the marked locations.
Summary of Contents for GEYSAIR
Page 2: ......
