BAILI ERTONG SMC Series, Operation Manual

Page: 19 / 19

Special warning
To ensure the actuator complete unit’s outer housing properties, during adjustment and maintenance, the
user should operate according to the operation manual and this special warning! If the user does not operate
correctly or does not operate according to the operation manual and special warning and causing the actuator
out of the factory, all the parts related to outer housing protection have been inspected strictly and be ensured
to be well sealed. If the user open the following parts due to the needs of adjustment or maintenance:
control box cover
wiring box cover
wire outlet assembly
after opening, the user must ensure:
during the operation of adjustment maintenance or some needed, at that time the actuator does not have the
precious protection properties, the user should ensure that it is kept from the invasion of rain, snow, hail,
moisture, dust and so on.
after operation, when the cover is put on or the wire outlet is tightened, the user should ensure that the opened
parts inside does not have any disadvantage elements such as water, dust moisture that may led to the
protection properties damaging.
after operation and the cover is put on, the user should ensure that all the fixing screws and the flat spacer and
spring spacer on the box cover should be tightened, with no phenomenon of leakage or loosening. at the
same time, the user should ensure that the rubber sealing ring which function as sealing part at the
contacting part of cover box and housing, does not be damaged and be painted calcium grease, and then
assemble as previous.
after the wire pass through the wire outlet, the user should ensure to tighten the tightening nut, to ensure
sealing. The screw sealing between the tightening nut and housing must have PTFE. At the same time, the
cable and tightening nutinner holes must be painted sealing (such as 609).
if other parts such as position window or local button, is opened due to some causes. And reassembled, the
user should ensure that the sealing is not affected with disadvantage.
Tianjin Baili Ertong Machinery Co., Ltd.
Address: No. 19, Taikang road, Dongditou industrial zone, Xiditou town, Beichen district, Tianjin
Tel: 86 22 26750313, 84911766, 84911866, 26154275
Zip code: 300408
http://www.tet.cn
Email: scb@tet.cn
Our Company reserves the right to amend this operation manual.
ཙҼ䙊7(7
user s er s
ater, dust moi , dust
at all the fixing screws an all the fixing screws
th no phenomenon of leak no phenomenon of
sealing ring which fun sealing ring which f
not be damaged and be p ot be damaged and b
the user should ensure t user should ensure
e tightening nut and hous ghtening nut and hou
s must be painted sealing st be painted sea
ndow or local button, is o or local button,
sealing is not affected wi cted