Bailey Infi 90 NTCU01, Instruction

Page: 10 / 31

INTRODUCTION
HOW TO USE THIS MANUAL
I-E96-417A 1 - 3
HOW TO USE THIS MANUAL
Read this manual before installing the TCU unit. Do the instal-
lation steps in order. Do not operate the TCU unit until you
complete all the steps in the next section. Refer to the appendix
for a quick reference guide to SPM or SIM module dipswitch
and jumper settings.
INSTRUCTION CONTENT
This manual provides introductory, installation, maintenance
and repair/replacement procedures. This manual has five sec-
tions and two appendices.
Introduction The introduction provides an overview of the TCU termination
unit, a description of the hardware, a glossary of terms and
abbreviations, and a table of electrical, physical and environ-
mental specifications.
Installation Section 2 is the installation section. It explains physical instal-
lation, wiring and cable requirements.
Maintenance This section contains a maintenance schedule.
Repair/Replacement
Procedures
Section 4 contains instructions explaining how to replace the
termination unit.
Support Services Support services cover training, documentation, and how to
order parts from Bailey Controls.
Appendices The appendices briefly discuss the IMSPM01 and INSIM01
modules and provide a cross-reference of dipswitch and
jumper settings for those modules.
NOMENCLATURE
Table 1-1 lists the nomenclature of related hardware.
Table 1-1. Nomenclature
Hardware Nomenclature
Field termination panel NFTP01
Serial interface module INSIM01
Serial port module IMSPM01
Termination cable,
TCU unit to SIM/SPM (PVC jacket)
TCU unit to SIM/SPM (non-PVC jacket)
NKTU01
NKTU11
RS-232-C cable HCBL01