INTRODUCTION
I-E96-406A
B - 1
APPENDIX B - NDIS01 DIGITAL INDICATOR STATION
INTRODUCTION
The NDIS01 Digital Indicator Station uses an NTAM01 unit for
termination to an IMAMM03 master module. This appendix
contains the dipswitch location on the NDIS01 station and
intensity jumpers and their settings. This information is pro-
vided as a quick reference guide for personnel installing the
NTAM01 unit. Figure
shows the address select switch
(SW1). Table
lists the binary addresses for setting SW1.
Refer to the
Digital Indicator Station NDIS01
instruction
manual for more detailed information to install and configure
the digital indicator station.
NOTE: Set jumper JP1 on pins 1 and 2 for a bright display. Set jumper JP1 on pins 2 and 3 for a dim
display.
Figure B-1. NDIS01 Address Select Switch (SW1)
Table B-1. NDIS01 Address Switch
Settings (SW1)
Address
Pole
1
2
8
0
0
9
0
1
10
1
0
11
1
1
NOTE:
open = OFF = 1, closed = ON = 0
JP1
2
1
3
OPEN
1 2
S1
ADDRESS SWITCH
DISPLAY BRIGHTNESS
JUMPER
T00476A
