interior lights.
Note: If the master switch is off, this button will
not function.
Pump Switch
When pressed will enable/disable the water
pumps. Holding this button will force the
internal pump to run.
Note: If the master switch is off, this button will
not function.
Note: See “Notifications and Warnings” section
for pump running notification.
Awning Switch
When pressed will switch power to the awning
light.
Note: If the master switch is off, this button will
not function.
Navigation Buttons
Use and buttons to navigate up and down
through menus.
Press
to enter function or change settings
(if further settings are available).
Menus
Home
The home screen is displayed by default. The
control panel will return to the home screen
when left idle. The home screen displays the
time as well as any relevant notifications or
warnings that are present.
Setting the time:
1. On the home screen, hold for 3 seconds
until the hours begin to flash.
2. Keep pressing or to change hours.
3. Press to set hours, minutes will now flash.
4. Keep pressing or to change minutes.
5. Press to finish.
Whale Space Heater
This control panel has been designed to
integrate Whale appliances into a single control
panel. To turn the heater off/on press . The
screen will display either the word off or the
thermostat setting. To change the heating
mode press and hold and the mode icon will
begin to flash. Press
or to change the
mode between the following options:
Icon
Mode
Description
2000W
Heat boost electric
setting
1000W
Intermediate heat electric
setting
500W
Quiet/ night time electric
setting
Off
Heater off position
Fan Only
Air circulation setting, no
heat output
or
Gas
Gas only setting
Or
Heat
Boost
Setting
Uses gas and electric
simultaneously for higher
heat outputs.
On all gas settings a filled flame represents
that the gas is currently burning. An empty
flame shows that gas is selected but not
burning. A flame icon on the homepage will
also indicate that a gas appliance is currently
in use.
Once the intended mode is selected press
to set the mode and move on to thermostat
temperature selection. Select the desired
room temperature with the and buttons
and press to save.
Note: Please consult the Whale user manual
for more detailed information on each mode.
Whale Water Heater
To turn the heater off/on press . The
screen will display either the word off or the
thermostat setting. To change the heating
mode press and hold and the mode icon will
begin to flash. Press
or to change the
mode between the following options:
This control panel has been designed to
integrate Whale appliances into a single control
panel. To turn the boiler off/on press . The
screen will display either the word off when the
boiler is off. To change boiler mode press and
hold
and the mode icon will begin to flash.
Press or to change the mode between the
following options:
47
6
FITTED E
QUIPMENT – T
he C
on
tr
ol P
anel
FITTED EQUIPMENT – The Control Panel
Summary of Contents for Approach Advance
