Bailey Approach Advance 615 2017, Owner'S Manual

Page: 138 / 193

136
SURF
A
CE C
ARE
the FENIX NTM surface. Any streaks can still
be removed by rinsing with hot water and
drying.
• Avoid furniture polishes and wax based
cleaners in general, because they tend to
form a sticky layer on the dense FENIX NTM
surface, to which the dirt adheres.
FENIX Nanotech Work Surfaces
The surface of FENIX NTM involves the use
of nanotechnology and is obtained through
next generation resins developed by Arpa
Industriale. Thanks to its technology, FENIX
NTM features advance properties. Besides
the main ones, such as an extremely matt,
soft touch, and anti-fingerprint surface, and
the thermal healing of microscratches, this
innovative material stands out for specific
properties which facilitate normal cleaning and
do not require particular maintenance. In fact,
it is extremely easy to clean and is resistant to
mold, it has enhanced anti-bacterial properties,
it is resistant to rub, scratches and abrasion, as
well as to acid solvents and household reagents.
Ordinary maintenance
FENIX NTM surface should be cleaned regularly
but does not require any special maintenance,
just a damp cloth with warm water or mild
detergents. Almost all normal household
cleaning products or disinfectants are perfectly
well tolerated. It is suggested to use a melamine
foam sponge - also known as magic sponge - for
the normal cleaning and maintenance of the
surface.
Extraordinary maintenance
In case of dirt which cannot be cleaned with
normal household detergents, due to the
irregular topography and closed surface of
FENIX NTM, the use of non-aggressive aromatic
solvents (acetone) is suggested. In case of micro
scratches, please refer to the specific surface
thermal healing instructions.
General precautions
For best results in cleaning FENIX NTM, it is
important to remember certain precautions:
• Although very durable, the surface of
FENIX NTM must still never be treated with
products containing abrasive substances,
abrasive sponges or unsuitable products,
such as sandpaper or steel wool;
• Products with a high acid or very alkaline
content should be avoided because they can
stain the surface;
• When using solvents, the cloth used must be
perfectly clean so as not to leave marks on