Baileigh WP-1800F, Operator'S Manual

Page: 11 / 32

9
9
25. Be sure all equipment is properly installed and grounded according to national, state, and
local codes.
26. Keep all cords dry, free from grease and oil, and protected from sparks and hot metal.
27. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill!
28. Keep visitors a safe distance from the work area.
TECHNICAL SPECIFICATIONS
Speed 0 – 6 rpm (Variable)
Thru Hole (Material OD) 2.25" (57.15mm)
Chuck Capacity 1/4"OD - 12"ID (6.35OD – 305ID mm)
Chuck Size Three Jaw 8" (203mm)
Maximum Current 300 Amps
Weight Capacity - Vertical 250lbs (113kg)
Weight Capacity – Horizontal 200lbs (91kg) 6”from Chuck
Weight Capacity – Angled 150lbs (68kg) 6”from Chuck
Drive Automatic / Manual
Power 110V, 60hz, 15A
Motor 220V, 1/8Hp (90W)
Shipping Weight 400lbs. (181kg)
Shipping Dimensions 60" x 44" x 68" (1524 x 1118 x 1727mm)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.