37
37
CHANGING BELT
Removal
1.
Unplug or disconnect lathe from power source
and lock out power.
2. Loosen the belt tension lock lever (A). Be sure the
belt tension lever (B) moves freely to release
tension from the belt.
3. Open the rear access covers (C).
4. Loosen both set screws (D) on the spindle
handwheel and turn the handwheel clockwise to
unthread and remove it.
5. Loosen the set screw on the spindle pulley (E) and
both lock collars (F).
6. Tap the spindle far enough out of the headstock
that the belt can be removed. A rubber or wooden
mallet may be required. Take care not to damage
the spindle threads or to lose parts in the process.
Figure 46.
Fig 44
A
B
Fig 46
Fig 45
E
F
D
Summary of Contents for WL-1220VS
