Baileigh VM-936E-1, Operator'S Manual

Page: 27 / 56

24
24
Table Limit Stops
Position the limit stops along the limit stop tracks to
confine the travel distance of the table.
Loosen the stop capscrew, slide the stop to the
required location, and retighten the cap screw.
Table Movements
“X” Axis:
Each increment of rotation on
the dial equals .002” (.05mm) so one
complete rotation of the dial will give
0.20” (5mm) of linear table travel on the
“X” axis.
“Y” Axis:
Each increment of rotation
on the dial equals .002” (.05mm) so
one complete rotation of the dial will
give 0.20” (5mm) of linear table travel
on the “Y” axis.
CAUTION:
Always keep the table locked in place unless controlled
movement is required. Table movement during machining operations could cause
the tool to bind with the piece part, resulting in damage to the tool and piece part, or
serious personal injury.
0
0 90 10
.002"
.05mm
0
0 90 10
.002"
.05mm
figure 10
figure 11
figure 9
A
B