Baileigh STS-16120CNC, Operator'S Manual

Page: 9 / 56

7
7
Dimension Calculation Operation
When dimension calculation function is used, the
wooden board’s height, angle and distance must be
input. The height and angle as shown on A and B of
the right drawing are the necessarily input numerical
values. The calculating way as follows:
1.
Input A, B and C to calculate D.
2. Input A, B and D to calculate C.
Note: A - D are machine’s saved size.
Other sizes are for calculating and are not needed by machine.
Ex 1: It's size . If you want to
cut it into your calculated size, the operating way
as follows:
Step 1: Push key on home page to enter
the processing editing page. Push key to
enter dimension calculation page and then input
the known dimension. A=50, B=45, C=80.
Note: For detailed numerical value
input way, please refer to Step 2 and Step 3 of
Processing Edit Operation.
Step 2: Push key to start calculating. After
finishing calculation, system will show the
calculated value on the page.
C
B
D
A
C
B
A