Baileigh STS-16120CNC, Operator'S Manual

Page: 10 / 56

8
8
Step 3: Push key to save the calculated
result onto the target value of home page. Or
push key to return to home page but the
calculated result will be cancelled and won't be
saved into target value.
Step 4: Push key to start action.
Note: For main saw blade’s height
setting, the pre-setting height is material
cutting value 10mm. So, the target value of the
main saw blade UP/DOWN mentioned in step 4
shows 60.0. If material cutting value
exceed system’s cutting height, system will show
error data. At this time, you can input the cutting
height by yourself. Such situation is not error of
system.
Ex 2: If the total length and the desired cutting
size are known and you want to calculate the size
of the remaining material, the operating way as
follows:
Step 5: Input material height A, angle B, cutting
size D and total length G.
Push key to calculate the size of the
remaining material E and F.
Note: For detailed operating way,
please refer to Step 1 and Step 2 of Ex 1.
C
B
A
D
F
G
E