Baileigh STS-16120CNC, Operator'S Manual

Page: 4 / 56

2
2
Micro-Motion Positioning Operation
Ex: If main saw blade’s present value is 0.0 and
you want to rise the main saw blade to 30.0, the
operating way as follows:
Step: Push key until key shows
present value 30.0.
Note: When micro-motion
positioning movement is used, key won't
show any target value.
Scoring Saw Operation
Accuracy of the scoring saw movement of this system is 0.05mm (i.e. touch it and it moves
0.05mm. The adjustable range is +/- 1mm. The following is the scoring saw operation.
Remarks: Accuracy of UP/DOWN movement of scoring saw is 0.01mm (i.e. touch it and it
moves 0.1mm) This system can memorize the last setting height of the scoring saw UP/DOWN
movement even though the power is closed. The using way: Start the scoring saw, it will
automatically rise to the last setting height. Stop the scoring saw, it will fall under the working
table. It is an optional function.
Ex: The scoring saw scoring saw forward/ backward shows 0.0 and you want to move to scoring
saw to -0.1, the operating way as follows:
Step : Push key on home page to enter the
scoring saw control page and then push key
until -0.1 shows on the left
0.10mm.
Note: Only touching key or
key can make the scoring saw up or down.