Baileigh SS-3528-S, Operator'S Manual

Page: 24 / 52

21
21
BEFORE OPERATING
Turn the motor on momentarily to check for proper rotation. The spindle should rotate
counterclockwise when looking down on the spindle. Correct as required. Run the machine for a
short period of time to insure that the moving parts are working properly with no excessive
vibration. If a problem develops, correct before turning the shaper on for general use.
OPERATION
PROTECTION . Take every precaution to protect yourself, others around you, and the machine
itself from improper use.
CARELESS ACTS . Give the work you are doing your undivided attention. Looking around,
talking to someone, and horseplay are careless acts that can result in serious injury.
COUNTERCLOCKWISE SETUP
With the cutter installed as shown in Figure 10, feed the
workpiece from right-to-left.
CLOCK WISE SETUP
With the cutter installed as shown in figure 11,feed the
workpiece from left-to-right.
WARNING:
For the sake of clarity, the shaper guard has been omitted
from most illustrations. All shaper operations must be done with the proper guard in
place and any other device which insures the safety of the operator.
CAUTION:
Always wear proper eye protection with side shields, face
shield, safety footwear, and leather gloves to protect from , chips, dust, burrs, and
slivers.