background image

 

 

13 

13 

ASSEMBLY AND SET UP 

 

 

 
1.  Remove the machine from the skid it was shipped on. 

2.  Position the machine as desired following the installation guidelines to be certain that the 

machine is supported evenly at all contact points. 

3.  Follow the electrical guidelines to connect the machine to a power supply. 

4.  Read through the remainder of the manual and become familiar with the die installation and 

settings as well as normal operation. 

 
 

GENERAL DESIGN DESCRIPTION 

 
You have made a practical choice in purchasing the RDB-480 Fully Programmable Bending 
Machine. It has been carefully built of high-quality materials and designed to give many years of 
efficient service. The simplicity of design and minimum effort required to operate the machine 
contributes towards meeting schedules and producing greater profits. 
The RDB-480 is an electric pow

ered “Rotary Draw” bending machine. To bend material, a 

bending die and counter die are required. The material is hooked by the bending dies’ hook arm 
and is powerfully rotated in the clockwise direction. As the bending die rotates, the counter die 
remains stationary, forcing the material to conform to the radius and shape of the bending die. 
This machine can rotate in both the clockwise and counterclockwise directions. A user-friendly 
touch screen operating station can store up to 170 bend programs with 10 sequential bends 
inside of the main program. 
The RDB-480 Bending Machine you have purchased is built of solid steel ensuring maximum 
rigidity. Tongue and groove design with grade 8 bolts throughout provide very high rigidity and 
stability. 
Throughout this manual are listed various safety-related descriptions for attention. These 
matters for attention contain the essential information to the operators while operating and 
maintaining. Failure to follow these instructions may result in great damage to the machine or 
injury to the operator. 
 
 
 
 
 
 

WARNING:

 For your own safety, DO NOT connect the machine to the 

power source until the machine is completely assembled and you read and 
understand the entire instruction manual. 

Summary of Contents for RDB-480





























































Reviews: