Baileigh BP-4830, Operator'S Manual

Page: 10 / 36

8
8
22. Keep all cords dry, free from grease and oil, and protected from sparks and hot metal.
23. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill! DO NOT touch live electrical components or parts.
24. DO NOT bypass or defeat any safety interlock systems.
TECHNICAL SPECIFICATIONS
Capacity 30T
Capacity Mild Steel
8ga. [0.1644”] (4.17mm)
Capacity Stainless Steel
10ga. [0.1345”] (3.41mm)
Stroke
5.9” (150mm)
Back Gauge
4.1” – 21.6” (105 – 550mm)
Bending Width
48” (1220mm)
Bending Thickness
0.157” (4mm)
Distance Between Columns
51.9” (1320mm)
Bottom Die V’s 4@ 0.75”, 1”, 1.5”, and 2” (19.05, 25.4, 38.1, and 50.8mm)
Bottom Die Hardness 50 HRC
Motor Power 4hp (3.0kW), 220V, 3ph, 60hz, 6.8A
Hydraulic Oil 1 gal. (3.78L)
Machine Size
78.3” x 31.5” x 49.2” (1990 x 800 x 1250mm)
Packing Size
85.4” x 36.2” x 56.3” (2170 x 920 x 1430mm)
N.W./G.W. 1147/1367lbs (520/620kg)
Based on a material tensile strength of *60000 PSI
– mild steel
**100000 PSI
– stainless steel
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.