16
16
GETTING TO KNOW YOUR MACHINE
The Baileigh Wood Lathe ML-1847VS adjustable speed wood lathes is a big capacity machine,
designed for industry, commercial shops, and schools, or wherever a demand exists for
continued accuracy and long life through safe, heavy-duty operation.
1.
Headstock Lock Handle:
(D, Fig.4) Locks head in
position. Unlock handle to position the head along
lathe bed. Tighten handle when properly positioned.
2.
Headstock On/Off Button:
(F, Fig.4) Pull the
button out to turn “ON” the lathe. Push the button in
to tur
n the lathe “OFF”.
3.
Headstock RPM Knob:
(G, Fig. 4) Turn knob to
desired RPM. There are two speed ranges offering
“speed” (330-3200) and “torque” (100-1200).
4.
Headstock For/Rev Switch:
(H, Fig. 4) Use the
toggle switch to change the direction the spindle
turns. Only change direction when the spindle has
stopped.
5.
Headstock RPM Readout:
(I, Fig. 4) Displays the spindles RPM, see Figure 5.
6.
Headstock Spur Center:
(J, Fig. 6) Used for turning between centers. Spindle taper is MT-
2. Remove spur center by inserting drift rod through the opposite end of the spindle and
knocking spur center out.
Fig 5.
Fig 6.
Fig 4.
Summary of Contents for WL-1847VS
Page 22: ...20 20 WIRING DIAGRAM...
Page 31: ...29 29 STAND AND BED ASSEMBLY...
Page 33: ...31 31 HEADSTOCK ASSEMBLY...