12
12
TRANSPORTING AND LIFTING
Follow these guidelines when lifting:
Always lift and carry the machine with the lifting holes
provided at the top of the machine.
Use lift equipment such as straps, chains, capable of lifting 1.5
to 2 times the weight of the machine.
Take proper precautions for handling and lifting.
Check if the load is properly balanced by lifting it an inch or
two.
Lift the machine, avoiding sudden accelerations or quick changes of direction.
Locate the machine where it is to be installed, and lower slowly until it touches the floor.
The lift truck must be able to lift at least 1.5
– 2 times the
machines gross weight.
Make sure the machine is balanced. While transporting,
avoid rough or jerky motion, and maintain a safe
clearance zone around the transport area.
Use a fork lift with sufficient lifting capacity and forks that
are long enough to reach the complete width of the
machine.
Remove the securing bolts that attach the machine to the pallet.
Approaching the machine from the side, lift the machine on the frame taking care that there
are no cables or pipes in the area of the forks.
Move the machine to the required position and lower gently to the floor.
Level the machine so that all the supporting feet are taking the weight of the machine and no
rocking is taking place.
CAUTION:
Lifting and carrying operations should be carried out by
skilled workers, such as a truck operator, crane operator, etc. If a crane is used to lift
the machine, attach the lifting chain carefully, making sure the machine is well
balanced. Choose a location that will keep the machine free from vibration and dust
from other machinery. Keep in mind that having a large clearance area around the
machine is important for safe and efficient working conditions.
