Baileigh Industrial DP-1850G, Operator'S Manual

Page: 25 / 52

22
22
SETUP and OPERATION
Operation Panel
Machine Usage
The drilling machine was designed to be used with specific tools and for certain machining
operations.
The most common machining operation is the drilling of holes with helicoidal drills. The drilling of
hole is carried out by the combination of a drill turning movement and a feed movement in the
turning spindle direction.
Besides the helicoidally drill, other tools can be used to drill holes. There is a great variety of drill
types and shapes in the market which can be used on this machine, provided that they are
designed for such a purpose and that can be fixed in the spindle taper. They will usually be the
Morse taper or ISO type. The drill shanks should have the corresponding taper to the spindle in
which they are to be fitted or parallel shank if they are going to be fitted by means of a tool
holder.
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from burrs and sharp edges.
Coolant Pump
Switch
Taping Switch
Main Power
Disconnect
Switch
Work Lamp
Power Feed Clutch
Switch (3)
Emergency Stop
Clockwise Switch
Stop Switch
Counter-Clockwise
Switch