Baileigh Industrial DP-1500VS, Operator'S Manual

Page: 22 / 64

19
19
High / Low Gear Selector
A gear transmission lever that selects Hi or Low speeds.
IMPORTANT: Use only while the machine is
stopped. Failure to do so will cause damage to the gear
system.
Drill Head
The Drill Head attaches to the top of the column. It houses
the motor, spindle, controls, and transfer mechanisms.
Attached to it is the electrical enclosure, the protective
guard, the work light, and the coolant valve with nozzle.
Worktable
The sturdy worktable can be positioned at varying heights
and rotated 180° in either direction. It has T-slots to allow
the use of 1/2” or M14 bolts. Below the worktable are
three crankshafts. The two crankshafts (H) control the up
/down motion of the table. Always unlock the table with
crankshaft (K) before changing the height or rotating it.
Then lock the worktable to secure in position. The one
handle works for all three crankshafts.
Machine Base
The machine base houses the coolant reservoir and
supports the coolant pump (I). The coolant is pumped up to
a nozzle where a valve controls the flow onto the tool. The
coolant / lubricant enters the table drain and flows back to
the reservoir.
H
H
K
I