| 34 |
EN
12 Technical Characteristics
12.1 Technical specifications
Diamond channel cutter type
BDN 511
Manufacturer
Maschinenfabrik OTTO BAIER GmbH
Operating voltage (V / Hz)
~230 / 50 / 60
~230 / 50 / 60
Connection plug (type)
EU, round pin plug
USA, NEMA 6
Power consumption (watt)
2400
2400
Protection class
/ II
/ II
No-load speed (min
-1
)
7200
7200
Disc diameter (mm)
150
150
Maximum disc thickness (mm)
3.5
3.5
Maximum cutting width (mm)
50
1)
50
1)
Cutting depth (mm)
7 – 25
7 – 25
Weight (kg)
Machine
2)
6.2
6.2
Diamond dry-cutting disc
0.220
0.220
Speed electronics
Yes
Yes
Sound measurement
3)
K = 3 dB
L
pA
(sound pressure) dB (A)
97
97
L
WA
(sound power) dB (A)
108
108
Vibration measurement:
4)
K = 1.5 m / s
2
Front handle (13)
1
m / s
2
2.4
2.4
Rear handle (2)
1
m / s
2
3.7
3.7
1)
With a cutting width of 50 mm, a clear channel is formed.
2)
Weight without insert tool and connection cable.
3)
Measured values for noise determined according to EN 60745.
Wear hearing protection!
4)
Total vibration values (vector sum in three directions) determined according to EN 60745 (continued on
next page).
The vibration emission values given in this instruc-
tion manual have been measured according to a
method of measurement standardised in EN 60745
and can be used for comparison between power
tools. They are also suitable for a preliminary esti-
mate of the vibratory stresses.
The vibration emission values given represent the
main applications of the power tool. If the power
tool is used for other applications, with different
insert tools or are insufficiently serviced, this can
significantly increase the vibratory stresses over
the whole work period. For a precise estimate of the
vibration emission values, the times during which
the tool is switched off or is running but not actually
in use should also be taken into account. This can
reduce the vibration stresses over the whole work
period significantly.
WARNING
Health risk due to vibrations.
Î
Additional safety measures should be taken to
protect the user, e.g. wearing anti-vibration pro-
tective gloves, correct maintenance of power
tools and insert tools, keeping hands warm and
good organisation of work sequences.
