Baier BDB 802, Original Instruction Manual

Page: 27 / 48

| 27 |
1 About this instruction manual
........... 28
1.1 Important information ............................. 28
1.2 Symbols used in the instruction manual 28
2 Safety Instructions .............................. 28
2.1 Workplace safety .................................... 28
2.2 Electrical safety ...................................... 29
2.3 Safety of people ...................................... 29
2.4 Using and handling the power tool ......... 30
2.5 Service .................................................... 30
2.6 Machine-Specific Safety Instructions .... 30
2.6.1 Operating personnel requirements ........ 30
2.6.2 Workplace safety .................................... 30
2.6.3 Electrical safety ...................................... 31
2.6.4 Safety of people ...................................... 31
2.6.5 Hazards when using and handling the
power tool ............................................... 32
2.6.6 Service / Maintenance / Repair .............. 33
2.6.7 Explanation of the pictograms on the
machine .................................................. 34
3 Technical Characteristics
................... 35
3.1 Technical specifications ......................... 35
3.2 EC Declaration of Conformity ................ 36
3.3 Machine characteristics ......................... 36
3.4 Machine parts and controls .................... 36
3.5 Intended use ........................................... 37
4 Before Starting Work ........................... 37
5 Operation and Control
......................... 38
5.1 Fitting or changing the wet diamond
core drill bit ............................................. 38
5.2 Connect water supply ............................. 39
5.2.1 BDB 802 ................................................. 39
5.2.2 BDB 802B ............................................... 39
5.3
Using the BAIER centring guide
BDB 802 with suction holder .................. 39
5.4 Switching on the wet diamond drill
and drilling .............................................. 40
5.5 Ending the drilling process ..................... 41
5.5.1 Through-hole .......................................... 41
5.5.2 Non through-hole (blind hole) ................ 41
6 Cleaning
................................................. 42
7 Maintenance
.......................................... 42
8 Handling wet diamond core drill bits 42
9 Disposal
................................................. 43
10 Tools and Accessories ........................ 43
11 Scope of Supply
................................... 43
12 Warranty
................................................ 44
Imprint
Version V03 / 2019-01
Copyright:
Maschinenfabrik
OTTO BAIER GmbH
Heckenwiesen 26
71679 Asperg
Germany
It is prohibited to forward or reproduce this docu-
ment or to exploit and disclose its contents, unless
expressly permitted. Any infringements will result in
liability to pay compensation for damages. All rights
reserved in case of patent, utility model or design
registration.
This instruction manual has been prepared with the
greatest possible care. Nonetheless,
OTTO BAI-
ER GmbH
does not accept any liability whatsoev-
er for possible errors in this instruction manual and
their consequences. Equally, no liability whatsoev-
er is accepted for direct or consequential damage or
losses resulting from improper use of the machine.
The national health and safety regulations and the
requirements of this instruction manual are to be ob-
served when using the machine.
All product names and brand names used are the
property of the holder and are not explicitly marked
as such.
Subject to change without notice.
Contents