34
Table 3-4: Management Server
Field Name
Description
SSL
Enable/Disable Secure Socket Layer (SSL) using
ON/OFF
. When enabled
the Management Server field changes to a secure http extension.
Management Server
Enter the management server IP address and port number
CloudKey
Operators using the Baicells CloudCore are provided a unique CloudKey
identifier that may be used when configuring CPEs and eNBs. If entered
in this field, when the device is powered on it will immediately associate
to the operator's OMC account. You can find your CloudKey ID when you
log in to the CloudCore. It is displayed in the top bar.
TR069 Binding
Binds TR-069 protocol information to a specific server.
SNMP
Enabled= OFF/ON
SNMP Agent Configuration Option available when SNMP option is enabled:
•
SNMP Version
•
SNMP System Name
•
SNMP Port
•
Contact
•
Location
•
Community String
•
Source
Trap Agent Configuration Option available when SNMP option is enabled:
•
Trap Community String
•
Trap Server
3.7.6 Configure Quick Settings
Under the
Basic Setting > Quick Setting
window (Figure 3-23) are several important fields you must
configure and/or verify. First, if the operator is using the Baicells CloudCore EPC, you must enter a
fixed Public Land Mobile Network (PLMN) and MME IP address:
•
PLMN =
314030
•
MME IP =
10.3.0.9 and 10.5.0.9
Do not change these settings except when connecting to a Local (private network) EPC or different
vendor's Evolved Packet Core (EPC). Second, you must enter the operator's planned settings for
Band, Bandwidth, EARFCN, Cell ID, PCI, TAC, etc. Some
Quick Setting
fields such as
Duplex Mode
and
Frequency
will auto-fill based on the eNB hardware model. Make sure the
Cloud EPC
field is
set to
ON
when using the Baicells CloudCore. If you are testing the eNB in a lab environment, turn
the power down as low as it will go under the
Power Modify
field.
