Baicells Atom R9, User Manual

Page: 12 / 25

8
2. Operation Steps
Make sure the CPE is turned off before you insert or remove the SIM card. Otherwise, the
CPE and SIM card may be damaged.
1. Insert the SIM card into the USIM slot.
Note:
If you want to remove the SIM card, please press down on the SIM card. The SIM card will pop up.
2. Insert the power adaptor and turn on it. The power indicator should light up to indicate
an operating power supply. Otherwise, you need to check the functionality of the
power adaptor.
3. Wait for 1 minute, if the MODE and SIGNAL STRENGTH indicators flash
simultaneously, it indicates that the SIM card did not connect to the device or is
invalid. You need to buy a new SIM card or contact the vendor.
4. The MODE indicator flashing indicates that the device is searching and registering to
the LTE network. If the device connects to the LTE network normally, the MODE
indicator will remain on. The SIGNAL STRENGTH indicator indicates the strength of
the LTE signal. If the device cannot connect to an LTE network, the MODE indicator
will begin blinking.
5. The WLAN indicator indicates whether the Wi-Fi function is enabled.
If Wi-Fi is enabled, mobile phones and laptops can connect to the network via Wi-Fi.
SSID is “Airtouch-8783”. No password is required the first time the device is used.
6. PCs and laptops can connect to the internet through the LAN port.
Attention :