17
9.
Pole installation:
a.
Low-Gain CPE:
a1) Attach a heavy-duty anti-slip rubber band on the pole (Figure 14).
Figure 14: Rubber Band
a2) Fix the CPE bracket over the band using the hoop (Figure 15).
Figure 15: Bracket
a3) Attach the CPE to the bracket and tighten the screw (Figure 16).
Figure 16: Attach CPE
a4) The CPE is now ready for installation at its final outside location. Proceed to
section 7
b.
High-Gain CPE:
b1) Tighten the four M6 screws on the bottom of the bracket (Figure 17).
Figure 17: Tighten Screws
