Copyright 1999-2009, Barcode Automation, inc.
38
Diagnostic Commands
Read Rate
Command:
RR
Purpose: Displays current read rate for the reader. To run this test,
you will need to hold a barcode steady in the laser line. To
stop this diagnostic, type “rr” and hit the enter key.
Options: none
Example:
RR
Diagnostic Mode On
Test Read Lo=98/0 Hi=98/0 PCB=76F Motor=19ms
Test Read Lo=99/1 Hi=100/0 PCB=76F Motor=19ms
Test Read Lo=100/0 Hi=99/0 PCB=76F Motor=19ms
Test Read Lo=99/0 Hi=100/0 PCB=76F Motor=19ms
Test Read indicates the read rates on the low gain and high gain
channels of the decoder. Most decals will only show 99 or 100 on
only one channel at a time.
PCB is the current temperature inside the reader.
Motor indicates motor speed.
