Copyright 1999-2009, Barcode Automation, inc.
28
Serial Communication Commands
Communication Baud Rate
Command:
CBR
Purpose: Set the communication speed (baud rate) for the serial port.
Note:
Once the parameter has been changed, it will not
take effect until the BA-440 DualBeam is restarted.
Options: 2400, 4800, [9600], 19200, 38400
Example:
CBR 9600
Good Read Message
Command:
GRM "Text ~F ~L~r~n"
Purpose: Set up the format of the message sent out the RS232 serial
port and USB port for each good read. Up to 18 characters
can be selected and must be enclosed in quotes ”” along
with any special designators desired.
Options: Up to 18 characters including special designators
“~F” - this will print the facility code from the decal
“~L” - this will print the decal ID number
“~C” - this will print the Check digit (only if a check digit is
used)
“~T” - this will print the time stamp for the message from the
BA-440 DualBeam internal clock
“~r” - this will print a carriage return
“~n” - this will print a line feed
